Ruth Niles Stainless Steel Bottle Stoppers

Made in USA

Watch Bottle Stoppers on YouTube!

Tod Raines (Woodturning Tool Store) and I have a six-episode tag team live stream series on making Bottlestoppers.

Recordings remain on YouTube for you to view.

Cindy Drozda on YouTube - Tod Raines on YouTube

Bottlestoppers are a great skill builder, gift, or craft show item!

They are also a canvas for practising new finishes or techniques.

I learned how to turn Finials by making and selling Bottlestoppers. They taught me the tool control to make spindle cuts, and how to put shapes together into a composition.

Stoppers are not just for wine! They seal whiskey, oil, vinegar
and many other types of bottles.

These Stopper styles both have the Superior Seal that fits the majority of all bottles.

They can stand on a shelf or windowsill when not in use so
your artwork is always on display.

- Attaches to your turning with 3/8″ x 16 tpi threaded stud, 1/2” (13mm) long.
- 1 1/4” (34mm) tall (not including threaded stud)
- Top diameter is 13/16” (22mm)
- Solid FDA food compliant stainless steel 304 18-8
- FDA food compliant nitrile O-rings
- Lifetime Guarantee on stoppers and o-rings
- Made and Patented in the USA

For more Stopper styles, lots of other kits and tools, information, and tutorial videos, please visit

I have put together some starter kits
with the tools and hardware.

Start turning Bottle Stoppers right away!

Kit #1 - With Mandrel - $62.90
Includes: (5) Stoppers, (5) Threaded Inserts, Mandrel of your choice,
Drill Bit for Inserts

Choose Mandrel type
Choose Stopper style

Kit #2 - No Mandrel - $44.80
Includes: (5) Stoppers, (5) Threaded Inserts, Drill Bit for Inserts

Choose Stopper style
SS-3000 Contemporary Style Stopper

See specifications at left

Single Stopper - $7.45
Pack of 5 Stoppers - $35.40


SS-9000 Stopper

See specifications at left

Single Stopper - $7.45
Pack of 5 Stoppers - $35.40


Stainless Steel Threaded Inserts
An insert is best in soft wood or materials that don't thread easily. Glue in with Polyurethane glue.Single Insert - $1.35
Pack of 5 Inserts - $6.40

7//16" Stub Drill Bit for Inserts - $4.15

Mandrels - $19.50

- Threaded with 1-1/4" x 8tpi threads to go on lathe spindle -

- #2 Morse Taper (The MT2 Mandrel must have a drawbar installed,
or the tailstock up at all times).

- The Niles Mandrel has a cut on the end of the thread so it acts like a tap
to cut threads in some types of wood.

Choose Mandrel type
$9.95 Priority Shipping per order
Standard Ground within the USA

All content on this site Copyright © Cindy Drozda | All Rights Reserved | Do not use without permission